If none of these materials is available to you you can always elect water heater to soak rags or towels in hot water and wrap them around the frozen pipe. This will probably take longer than any of the methods previously mentioned.
After you have checked these areas, take a close look around the refrigerator, both inside and outside. Is there any usual condensation that could indicate a water leak somewhere? Is the icemaker hose fastened securely to the water line repair line? Check also for any water spots on the floor, as these are typically clear signs of a water leak somewhere.
One other common design that is considered "washerless" was made famous by Delta and copied by several other makers. It uses little "cup" seals that fit over springs recessed in the back of the valve body. The springs press these "seals" against the cartridge and regulate the flow through little tapered openings in the cartridge. If you have one of these and it's dripping, changing these springs and seals will usually correct it. Here's a tip. Once you have the cartridge out of the way, insert a phillips screwdriver into the seal and pop both the seal and spring out. Stick the new ones on the end of the screwdriver to help guide them into place. This is especially helpful if you don't have long slender fingers.
The next step in this process is to determine what type of method is available for fixing the problem. You cannot just caulk a crack or fill it in with cement and hope for the best. Unfortunately, there is more work than this because you have to fix the problem from both the inside out and the outside in. This takes a professional in most cases to determine the best method for repair.
These are people who would naturally refer to each other because they typically refer to each other. What about a "Home" referral team? people that support the "home" industry. More people are electing to keep their home and are willing to do the maintaining or fixing up. Electrician, plumber, window, roofer, siding, flooring, and so on. Think about these people getting together once a week to talk about projects that they are working on and creating a water line repair core of competent reliable partners that refer to each other. Inevitably, a person needs carpentry work after the electrician leaves.
Turn the water off at the main shutoff valve at the street. You should be able to take a pair of pliers(or your bare hands) and turn the valve at the water meter to shut off the water to your home. Once you have shut off the water you can cut the pipe around the leak and make the repair.
Once you've located the water shut off, turn it off. Now, you can turn your attention to trying to contain the water damage caused by any leaking. Get towels, fans, blankets, or anything else to try and sop up water that is sitting on carpet or wood floors. Linoleum floors usually don't undergo much damage from having water sitting on them, unless there are cracks in the linoleum (often invisible) where the water can seep in. When your Queens plumber arrives, you will be one step ahead by following these instructions.